Product Description
Product Description:
1.Flexspline is a hollow flanging standard cylinder structure.
2.There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The internal design of the reducer has a support bearing.
3.It has a fully sealed structure and is easy to install. It is very suitable for the occasions where the wire needs to be threaded from the center of the reducer.
Advantages:
The first:High precision,high torque
The second:dedicated technical personnel can be on-the-go to provide design solutions
The third:Factory direct sales fine workmanship durable quality assurance
The fourth:Product quality issues have a one-year warranty time, can be returned for replacement or repair
Company profile:
HangZhou CZPT Technology Co., Ltd. established in 2014, is committed to the R & D plant of high-precision transmission components. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly believe in quality first. All links from raw materials to finished products are strictly supervised and controlled, which provides a CZPT foundation for product quality. Our products are sold all over the country and abroad.
The harmonic reducer and other high-precision transmission components were independently developed by the company. Our company spends 20% of its sales every year on the research and development of new technologies in the industry. There are 5 people in R & D.
Our advantage is as below:
1.7 years of marketing experience
2. 5-person R & D team to provide you with technical support
3. It is sold at home and abroad and exported to Turkey and Ireland
4. The product quality is guaranteed with a one-year warranty
5. Products can be customized
Strength factory:
Our plant has an entire campus The number of workshops is around 300 Whether it’s from the production of raw materials and the procurement of raw materials to the inspection of finished products, we’re doing it ourselves. There is a complete production system
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibition:
Application case:
FQA:
Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer.
Or you can also provide below specification as well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Agricultural Machinery, Hst-IV |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Choosing an Agricultural Gearbox
When it comes to choosing an agricultural gearbox, you may be wondering which one is right for you. The right gearbox for your tractor is important for several reasons. Here are some factors to consider. This article will provide an overview of these components. These parts include the Bevel gearbox, the Surface finish, Ellipticity, Bearings, and more. CZPT P/L offers a range of gearboxes for many different agricultural applications. The company’s PTO Speed Reducer/Increaser is specially designed to maintain the original rotation of PTO output.
Bevel gearboxes
Agricultural bevel gearboxes have high load capacity, making them an excellent choice for heavy-duty machines. Bevel gearing is also popular in mechanical transmission systems, such as those found on tractor transmission systems. Modern harvesters and other agricultural equipment require high-performance gearboxes to maintain efficient performance. To meet these requirements, agricultural equipment OEMs trust the Bevel gearboxes manufactured by CZPT Gearbox Company.
Unlike conventional worm gears, bevel gears use multiple shafts to transmit power. The bevel gears have three types of shafts, namely, hollow, projecting, and double-extended. In addition to being hollow, bevel gears can have additional shafts installed opposite the input shaft. They are available in a standard mount, aluminum housing, and three shaft types: double-extended, hollow, and projecting.
Agricultural bevel gearboxes are typically made from closed-grain cast-iron, although higher-sized models are made from SG 500/7 material. The screw is made from Cr-Mo medium carbon steel, which is hardened and tempered to maintain high core strength. A tapered roller bearing is mounted in the housing and is designed to carry heavy axial and radial loads. These gearboxes are also widely used in mixing, distribution, and cleaning machinery.
Bevel gearboxes for agricultural equipment are primarily used in agricultural machinery applications. Agricultural machinery often uses a PTO to transmit torque, but can only provide it at low speeds. Because of this, gearboxes are used for low-speed, massive-torque applications. Soil preparation and crop treatment are two common uses for these gearboxes. They are also useful in cement mixers.
Surface finish
In engineered gearboxes, the surface finish of the gear tooth surfaces is critical for smooth operation. Microscopic examination of gear tooth surfaces reveals a fine, unidirectional pattern. Traditionally used finishing methods include hob shaving, gear grinding, and honing. These techniques can improve the overall finish, but they also have their drawbacks. To overcome these problems, manufacturers use modern machine tooling techniques.
Agricultural gearboxes must be free from casting defects and mechanical damage. The processing surface must be flawless, with the ellipticity of the shaft hole no greater than 0.02 mm, and the centerline unevenness of the shaft holes is less than 0.015 mm. The relationship between shafts and bearing housing must be within 0.6 mm. These standards are crucial for the operation of agricultural machinery gearboxes.
Earlier, the gears were made of H11 and H13 tool steel, which progressively weakened after 20 gears. The tempering temperature is five to seven degrees Celsius or ten degrees Fahrenheit, depending on the steel used. To address this problem, Alloy 718 was developed. The alloy improved the life of die inserts, which reduced the overall cost. Further, the improved surface finish of agricultural gearboxes helped the customers reduce operating costs.
Ellipticity
A number of tasks require the use of an agricultural gearbox. These tasks can range from gardening to maintaining green spaces. These gearboxes transmit power from the input shaft to the output shaft, facilitating the change in direction, speed, or rotation. A quality gearbox is vital for the performance of agricultural machinery. Consider the type of operation you will be performing before buying one. You will also need to decide whether you will lubricate it.
An CZPT P/L Gearbox is one of their products. The company offers a full line of agricultural gearboxes at competitive prices. These gearboxes are designed to reduce input shaft speed and increase the PTO speed. The PTO Speed Reducer/Increaser is specially designed for this application. It helps maintain the original rotation of the PTO output shaft. It is suitable for various agricultural applications, including harvesters, balers, and cultivators.
An agricultural gearbox has an elliptic nature. It rotates around an axle core 90 degrees to create a bias state. The axle core of an agricultural gearbox rotates at a 90-degree angle to keep the shaft of the farming arbor in a neutral state. The bias state reduces the rotary driving force and reduces the amount of energy used in the operation. If a gearbox is designed correctly, it will keep a desired rotation torque.
Bearings
Agricultural gearboxes require high-quality bearings, and the global market is undergoing a transformation as more agricultural equipment becomes mechanized. The demand for bearings in agricultural equipment is expected to increase in the future, as cropping cycles will become shorter, and machinery will be used more intensively. Consequently, the wear on agricultural gear teeth and bearings will increase. This will result in a higher replacement rate for these parts.
Agricultural gearboxes must be able to withstand the high demands placed on them by the mounted farming implements. Harrows are a common example, and their disc-shaped attachments work to mix the top layer of soil. Because of their high demands, they must rotate continuously, and no matter what the terrain, they must be easy to run. Moreover, customised bearings will provide better seals.
In a study of 53 different agricultural gearboxes conducted by CZPT UK, they simulated 73 gear selections to find the right type of bearing. The simulation model took four weeks to set up and seven hours to run. As a result, CZPT always selects the “best bearing for the job” – a fitting solution. As such, CZPT understands the end user’s needs.
Quality of materials
Agricultural gearboxes play a vital role in the production of food. With the world’s population increasing, the need for food will also increase, and that means a greater need for efficient gearboxes. To make this happen, gearboxes must be able to withstand a variety of environmental conditions, including high and low temperatures, operation in arid and moist environments, and safety regulations.
A bevel gearbox has spiral bevel pinions that transmit rotational power to the axle. It is used in a variety of agricultural applications and is available in a range of ratios, horsepower, and configurations. This right-angle gear drive is widely used in portable grain elevators and grain carts. It has a 15-mm shaft diameter and is compatible with offset rotary fillers and hollow output shafts.
The gear box of a tractor is usually made of grey cast iron. Grey cast iron is a great choice for this component because it provides good wear resistance and vibration dampening. Belt pulleys are also made from grey cast iron. Large belt pulleys are made by casting processes. Similarly, the brake drum material needs to be high-quality to be effective. It is generally made of grey iron ASTM A48 Class 35.
editor by Dream 2024-04-27
China best Small Gearbox For Robot Arm Harmonic Gearbox Economical Gear Reducer Bearing near me supplier
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, robots
Weight (KG): 0.15 KG
Customized support: OEM
Gearing Arrangement: Harmonic
Output Torque: Harmonic
Product name: Harmonic Drive bearings
Application: Robot
Material: Bearing steel
Keywords: bearing
OEM: Accepet
Certificate: ISO9001:2015
WEIGHT: 0.15kg-9.6kg
Feature: Long Life
Packing: Box Packing
Brand: PRS
Packaging Details: Carton packing
Port: HangZhou port,HangZhou port ZheJiang port
Small Gearbox For Robot Arm Harmonic Gearbox Economical Gear Reducer Bearing PRS’s main bearing products have the characteristics of high precision, convenient use and maintenance, Custom Made Machined Tractor Main Shaft Gear Drive Shaft According to Requirements low cost, short delivery cycle, and high cost performance. They are widely used in electronics, medical, energy, machine tools, 1HP 2HP 3HP Three Phase AC Asynchronous Geared Motor Beiji Vertical Electric Motor Gearbox test equipment, robots and industrial automation equipment. In the past 10 years, the company has opened up new projects: the processing of the key components of the copper pipe processing equipment for condensation and the entire set of equipment, and has accumulated mature production, installation and commissioning experience. Details Images Product Paramenters Recommend Products product application Company Profile Exhibition Product packaging FAQ Q1: Are you trading company or manufacturer ?A1: We are factory.Q2: How do I start purchase?A2: You can email or contact with our online salesman, then get offer and shipping cost for our order..After payment done, LB CZPT Excavator Reducer Excavator PC60-1 Swing Gearbox Swing Replacement Parts we will ship goods on time.Q3: What is the advantage about your company?A3: Our company has professional team and professional production line.Q4: Why should I choose your products?A4: Our products are high quality and low price.Q5: Any other good service your company can provide?A5: Yes,we can provide good after-sale and fast delivery.
Choosing a Gearbox For Your Application
The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve one or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.
Dimensions
Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.
Construction
The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on two gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.
Working
A gearbox is a mechanical device that transmits power from one gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than one pair of gears, and a first gear may be used for the reverse. When a gear is shifted from one position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.
Advantages
Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than one with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.
Application
While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.
in Kota Kinabalu Malaysia sales price shop near me near me shop factory supplier Spherical Roller Bearing Aligning Bearing 24020 K for Printing Machinery by Cixi Kent Bearing Manufacture manufacturer best Cost Custom Cheap wholesaler
If you need to have any information or samples, make sure you make contact with us and you will have our soon reply. Our merchandise selection contains all sorts of helical gear, spur equipment, bevel gear, gear rack, worm equipment, sprockets,chains, bearings. Our products are applied in several fields.
Specification
Spherical roller bearing has two columns of roller, mainly bear radial load, but also can have aXiHu (West EPT) Dis.al load in either course.Have higher radial load ability, eEPTTly suitable for overloading or unEPTTvibration loading work, but can’t afford to pure aXiHu (West EPT) Dis.al load.This sort of bearing outer ring raceway is spherical condition, so the self-aligning functionality is very good, can compensate the alignment mistake.
product screen
Software
1. EPTT controlling EPTT
two. Semi-conductor sector
3. EPTT sector EPTTry
4. Medical products
five. EPT vitality equipment
6. EPTT tool
7. Parking technique
8. EPT-pace rail and aviation transportation tools, and many others.
EPTT amp EPT
EPTT Element | 1.EPTT Exporting Bundle two. Specific plastic/EPTT/pallet three. As the customers’ requirements |
Shipping and delivery Element | thirty-45 daEPTTfor standard get |
About us
HangEPT EPT bearing organization was estabEPTTd in 2003 and is a single of the leading bearing companies and exporters in EPTT. EPT EPTTizes in the design and manufacturing of high precision, higher pace and minimal noise groove ball bearings and pillow block bearings. At existing, the EPTT has much more than 1,000 staff, a set property of 2 billion EPTT, and generates 250 million sets of bearings each year. The EPTT’s items are extensively utilised in far more than fifty nations and regions unEPTT2 independent makes, namely quotBUGAO quot and quotNBKT quot.
EPT and DeveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment
Given that 2003, the EPTT has established up a EPT amp DeveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment CEPTTr outfitted with numerous laboratories employed for precision measurement, mechanical screening, lifespan screening, and physicochemical screening, to repeatedly up grade its capabilities and increase its producing stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd and product’s precision. Our workshops are installed with a collection of EPTd numerically-controlled, grinding and assembly tools that uEPTTze centralized filtration and cooling methods. Jointly with the production products suppliers, we deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed these grinding, ultra-precision, completely automated integrated creation lines, and very own the mental house legal rights. The precision amount of the items are at P5 degree and earlier mentioned, with sounds degree reaching Z4, V4 and over. Some of our projects have exceeded the 30% precision reserves. Our products are broadly utilized in electrical motors, automobiles, motorcycles, EPTT EPTs, textile, electrical tools and drinking water pump tools EPTT, equally domestically and EPTTly.
Why choose us?
#9604 HangEPT EPT bearing EPTT,Ltd estabEPTTd in 2003, has been targeted on higher precision and lower noise deep groove ball bearing research and manufacturing. Engaged in overseas trade for 16 many years, we offer goods for several EPTT fields. We connect EPTTant to EPTT manufacturing, Not only gained wideapresd praise in the domestic market place, but also achieve the recognition of overseas market place, these kinds of as European,SouthEPT Asian and Africa market place.
#9604 The organization has more than twenty assembly traces, and by means of ISO9001:2000 quality administration method certification, has a skilled specialized and services team, specialized staff proportion of more than 30%. In excess of the several years, we have been adhering to the use of large-stop uncooked substance manufacturing, from the first to every single phase, with excellent product deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment abilities and stringent quality manage, we keep on to expand the merchandise line and software variety.
#9604 To find out from the EPTd degree at home and overseas, to EPT their personal high-quality bearings, is the everlasting pursuit of EPT bearing firm. Uphold the quotTrue high quality is much more tough, let the bearing transfer much more quieter quot
company philosophy, we have EPTd numerous buyers very good praise.
#9604 Very good Warranty we take buyer fulfillment and merchandise high quality as the initial priority for us, we supply reputable warranties and excellent following-income solutions.
FAQ
1.Q: Are you a factory or trading company?
A: We are manufacturing facility EPTTized in manufacturing and exporting bearings.
2.Q: Where is your factory situated? How can I visit there?
A: Our factory located in HangEPT EPT, HangEPT metropolis . You can fly to HangEPT EPTT Global Airport straight. All our clients, from house or abroad,are warmly welcome to check out our factory.
3.Q: Do you supply samples ? it is free cost?
A: Yes, we could supply the sample for totally free charge but do not shell out the EPT of freight.
four.Q: What is your principal merchandise?
A: We are producing 10 collection and total about a hundred kinds of bearings.
5.Q: What is the MOQ for bearings?
A: Our MOQ is a thousand parts.
Speak to us
Phone: | -574-6357177, 63192752 |
Fax: | -574-63192753 |
Tackle: | EPTn Sector Zone, EPTT City, HangEPT, HangEPT, EPTT |
in Vale do Aco Brazil sales price shop near me near me shop factory supplier Part Number Yn40f00026f1 Slewing Ring Bearing for Excavator Sk200-8 manufacturer best Cost Custom Cheap wholesaler
our products are marketing properly in the American, European, South American and Asian marketplaces. Support & High quality controlWe source in depth drawings and offer whenever required. We are seeking forward to building productive enterprise associations with new clientele all around the globe in the foreseeable future. 1. EPTT introduction
HangEPT King EPT EPTT EPTT EPTT,Ltd.is a skilled company and exporter of excavator slewing rings, its manufacturing unit is found in HangEPT metropolis, ZheJiang Province,very near to ZheJiang Port, items can be very easily transported all over the globe.
Our main solution is excavator slewing rings, we can now generate far more than a thousand element numbers to match with a lot of famous excavator makes, such as EPTT, KOMATSU, HITACHI, KOBELCO, HEPTTDAI, VOLVO, DOOSAN, LIEBHERR, DAEWOO, JCB,Case, SUMITOMO, KATO,and so forth.
Our engineers have far more than 20 many years abundant experience in researching excavator slewing rings and we have professional measuring team can go to clients ‘ workplace to measure the old or damaged slewing rings, then to generate the very same replacements. We have our very own manufacturing unit with newest CNC EPTTs , such as vertical lathes, EPT hobbing EPTTs, EPT shaping EPTTs, hole drilling mahines, quenching EPTTs, vertical grinding EPTTs, turning EPTTs,etc. to fulfill customers’ fast supply demands.
We will adhere to the quotquality initial, believability very first quot enterprise philosophy and regularly provide our clientele with exceptional top quality merchandise and companies. We warmly welcome customers from all above the world to check out us and collectively to construct a EPT EPT !
2. Our slewing rings can match with a lot more than one thousand excavator versions.
3. Our excavator portion numbers as beneath:
CAT EPT Ring Substitution | |||
Excavator design number | Portion number | Excavator model quantity | Element variety |
CAT 307 | 102-6377 | CAT 325C | 227-6087 |
CAT 307C | 240-8361 | CAT 325 | 199-4483 |
CAT 308C | 240-8362 | CAT 325 | 4178151 |
CAT 312CL | 229-1077 | CAT 325 | 3530676 |
CAT 311 | 231-6853 | CAT 325 | 2316854 |
CAT 312B | 616411 | CAT 325CL | 199-4475 |
CAT 312CL | 229-1077 | CAT 326 | 353-0649 |
CAT 312C | 229-1077 | CAT 329D | 227-6087 |
CAT 315 | 148-4568 | CAT 330 | 7Y571 |
CAT 318B | 148-4568 | CAT 330 | 1994559 |
CAT M315 M318 | a hundred forty five-4809 | CAT 330 | 353-0487 |
CAT 315C | 229-1080 | CAT 330B | 231-6859 |
CAT 319C | 227-6079 | CAT 330B | 114-1434 |
CAT320B | 1141414 | CAT 330D | 227-6089 |
CAT320BL | 121-8222 | CAT 330C | 227-6089 |
CAT 320 | 7Y1565 | CAT330D/DL | 227-6090 |
CAT 320B | 114-1505 | CAT 336D | 353-0489 |
CAT 320BL | 177-7723 | CAT 336DL | 227-6089 |
CAT 320BL | 114-1341 | CAT 336DL | 353-0680 |
CAT 320C | 227-6081 | CAT 336D | 353-0490 |
CAT 320C | 227-6147 | CAT 345 | 227-6052 |
CAT 320C | 171-9425 | CAT 345B | 136-2969 |
CAT 320D | 227-6082 | CAT 345B | 200-3645 |
CAT 320L | 7Y1563 | CAT 345BII | 227-6094 |
CAT 320L | 7Y1563 | CAT 345BL | 136-2970 |
CAT 225 | 8K4127 | CAT 345BL | 169-5536/169-5537 |
CAT 322C | 221-6764 | CAT 345DL | 227-6037 |
CAT 324D | 227-6085 | CAT 345ECL | 227-6052 |
CAT 325 | 7Y0745 | CAT 349D | 353-0490 |
CAT 350 | 1026392 | CAT374 | 333-3009 |
CAT 365C | 199-4565 | CAT374 | 367-8361 |
CAT 365C | 227-6096 | CAT 385C | 199-4491 |
CAT 365C | 227-6097 | CAT 385C | 227-6099 |
CAT 365C | 199-4586 | CAT 385BL | 227-6098 |
CAT 365CL | 267-6793 | CAT 385CL | 227-6099 |
CAT 365CL | 397-9666 | CAT 390D | 227-6099 |
CAT374F | 378-9586 |
4. Our excavator slewing ring images
5. Our slewing bearing EPTT pictures
6. EPT way: By sea/ air/ rail/ street/ TNT/DHL/UPS/Fedex,ect.
7. Speak to information
in Aracaju Brazil sales price shop near me near me shop factory supplier Standard 625 Miniature Ball Bearing 5*16*5mm for Skateboard manufacturer best Cost Custom Cheap wholesaler
EPG has established up a full established of good quality management technique which is presented with advanced inspection and take a look at tools. Great focus has been paid on environmental defense and vitality saving. Thanks to our wide solution range and rich ordeals in this business,
one.Item Specification:
The variety of deep groove ball bearing sixty two sequence ingredient materials utilized in 3D Printer,fishing EPTs and other specific EPT . Its broad application, simple style, non – separation, ideal for high – pace, reputable operation, low maintenance EPTs.The tigEPTT consistency among deep raceway and groove and ball permits deep raceway ball bearings to stand up to aXiHu (West EPT) Dis.al masses in each directions in addition to radial masses.
two.Item Element:
EPT Title | Deep Groove Ball EPTT 625 |
Measurement (d*D*W) | 5*sixteen*5 mm |
EPT | P0,P6,P5,P4 |
EPT | Open up,Z,RZ,ZZ,RS,2RS |
Radial play | C2,C0, C3 |
EPT | Chrome Metal, Stainless Steel,EPTT Steel,Ceramic |
Function | Reduced sound, EPT quality,EPTT operating existence Resistance to use,EPT |
EPTT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd | ISO9001:2015 stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Software | 3D Printer,fishing EPTs, precise EPT,Skateboard |
EPT Qualities | one.EPT precision two.EPT rotate velocity three.Can be EPT in accordance to your wants |
3.Merchandise Picture:
4.Application Region:
5.Manufacturing unit Production
6.Why select us?
#9604 HangEPT EPT bearing EPTT, Ltd estabEPTTd in 2003, has been focused on high precision and minimal sound deep groove ball bearing research and manufacturing. Engaged in international trade for 15 many years, we give goods for a lot of EPTT fields. We connect EPTTant to EPTT production, Not only gained wideapresd praise in the domestic marketplace, but also achieve the recognition of foreign marketplace, these kinds of as European,SouthEPT Asian and Africa market place.
#9604 To discover from the EPTd level at house and abroad, to EPT their possess high-top quality bearings, is the eternal pursuit of EPT bearing firm. Uphold the quotTrue good quality is more sturdy,permit the bearing move quieter quot.Rigorous company philosophy helps make us get very good praise from numerous consumers.
Strive for Excellence in Manufacturing
#9604 The firm has much more than twenty assembly lines, and via ISO9001:2000 high quality management system certification, has a expert complex and services staff, complex staff proportion of much more than 30%. More than the many years, we have been adhering to the use of large-finish uncooked substance production, from the first to each and every step, with outstanding item deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment abilities and rigorous good quality management, we carry on to grow the item line and application selection.
#9604 Good Warranty we consider customer gratification and solution top quality as the first precedence for us, we offer reputable warranties and great following-revenue services.
7.EPTT Visiting
EPTT international bearing EPT in ZheJiang , 2018
Take part in Hannover Messe in Germany, 2019
eight.EPTT amp EPT:
EPTT Element | one.EPTT Exporting Package deal two. Person plastic/EPTT/pallet three. As the customers’ demands |
Shipping Element | thirty-forty five daEPTTfor regular purchase |
One package Barrels bundle EPTT circumstance package deal
nine.Speak to information:
Telephone: | -574-6357177, 63192752 |
Fax: | -574-63192753 |
Tackle: | EPTn Sector Zone, EPTT Town, HangEPT, HangEPT, EPTT |
ten.FAQ of Deep Groove Ball EPTT
1.Q:Are you a manufacturing unit or investing company?
A:EPT EPTT is EPTTized in manufacturing and exporting bearings,
and we have our personal factory and warehouse.
two.Q:Can I get some samples and do you supply the sample cost-free?
A:Of course, confident, EPT EPTT are honored to offer you you samples.
three.Q: How about the shipping and delivery?
A: We can organize the shipment or you could have the EPTTer.
4.Q: Could you inform me the substance of our bearing?
A: We have chrome metal, and stainless steel, ceramic and plastic materials.
five.Q: Can we get help if we have our personal industry place?
A: Please inform us in depth data about your industry,we will dicuss
and propose helpful suggestion for you and to locate the ideal solution for you.
OEM Coverage
one.We can printing your manufacturer (brand,artwork)on the protect or laser engraving your brand name
on the shield.
two.We can customized your EPTT in accordance to your design and style.
3.All copyrigEPTT possess by customers and we promised do not disclose any info.
in Changwon Republic of Korea sales price shop near me near me shop factory supplier China Reliable High Accuracy CNC Centerless Center Less Grinding Machine S200 for Small Precise Workpiece Needle Roller Bearing manufacturer best Cost Custom Cheap wholesaler
We also can style and make non-normal goods to meet customers’ special demands. EPG has established up a complete established of high quality administration program which is offered with superior inspection and examination tools. our merchandise are offering nicely in the American, European, South American and Asian markets.
HCGM-S200 EPT EPT CNC/PLC CEPTTrless Grinder
1. EPEPT characteristics:
1.1 For EPT wheel and Regulating wheel
one.1.one. The grinding wheel developed for cantiEPT kind, whilst grinding bracket fixed.
one.1.two. The spindle of grinding wheel adopted muti-plate EPTT bearing bushed static-hydrodynamical oil movie bearing.
one.one.three. The body of regulating wheel moves for adjustment and workpiece mounted in orEPTTto geared up distinct feed units. The spindle created for double bracing sort, as well as double cylindrical roll bearings, which with EPT rigidity, and higher precise grinding.
1.1.4. The regulating wheel feed slide is equipped double quotV quot roller XiHu (West EPT) Dis.Hu (West EPT) Dis.way and servomotor that EPTs ball screws.
1.2. For Lubrication
1.two.1. Lubrication thermostat equipped in grinding wheel spindle.
one.three. Electric powered
one.3.one. AC frequency converter is utilized for regulating wheel phase-significantly less velocity management, as well as reverse towing avoid purpose.
one.four. Dressing
1.four.one.EPT motor EPTs the ball screw amp double quotV quot roller XiHu (West EPT) Dis.Hu (West EPT) Dis.way are adopted on grinding wheel dresser.
1.four.two. EPT motor EPTn the ball screw amp double quotV quot roller XiHu (West EPT) Dis.Hu (West EPT) Dis.way are adopted on regulating wheel, phase-less pace.
one.five. Cooling technique
1.five.1. The coolant technique is equipped with magnetic coolant separator.
one.six. EPTT system
1.6.1. Touchable panel, computerized plunge-lower grinding, the load, speed, time and action adjustable
one.6.2. PLC and CNC handle techniques optional.
one.seven. EPTT human body and design and style
one.7.1. The modularization layout has great looking. Its configuration can be chosen as shopper demands.
one.7.two. Iron casting with substantial rigidity, natural growing older.
2.Principal configuration
Parts Name | QTY | Unit | Supplier |
EPTT Method PLC | one | set | EPT |
Servo EPT | 1 | established | EPT |
Touch Panel | 1 | personal computer | EPT |
Inverter of Regulating Wheel | 1 | computer | EPT(optional) |
EPT Wheel EPT | one | computer | HangEPT(optional) |
Regulating Wheel EPT | 1 | laptop | ABB(optional) |
EPT motor | one | laptop | Panasonic(optional) |
Reduced Voltage System | one | set | Schneider |
Oil Temp.Coolant | 1 | personal computer | HangEPT |
Ball Screw | one | NanEPTTg EPTnical EPT Manufacture EPTT, LTD |